Door code message template for guests: what to include, with email and SMS examples

The lock can work perfectly and the guest will still ring you at midnight if the message does not say which door is theirs and what to do with six digits. Here is what has to be in it, a ready template and the send settings.

In short A door code message has to answer six questions: what the code is, which doors it opens, from when until when it works, what the address is, how to enter it and who to call. The safest way is to send it by email and SMS the day before arrival, before noon. PinRoom has editable templates in 8 languages and by default sends them the day before arrival at 10:00.

Six things the message must contain

  1. The code. Written in digits, ideally in two groups of three, because that is easier to copy. No links and no app to download.
  2. Which doors. The name of the room or apartment, and a note that the same code opens the entrance to the building, if it does.
  3. The validity period. The day and hour the code starts working and the day and hour it stops. A guest who turns up two hours early should learn that from the message, not from a door that stays shut.
  4. The address. Street and number, and where the way in is tricky, one sentence about it: which gate, which staircase, which floor.
  5. How to enter the code. One sentence about the keypad. Locks that run in the TTLock app confirm the code with the # key.
  6. A help number. A phone that somebody answers in the evening. Without it the guest will call the booking portal.

Everything else is an extra: the Wi-Fi password, parking, check-out time, local tourist tax. Put extras underneath, so the code stays in the first two lines.

The template: email and SMS

This is the default English template from PinRoom, filled in with sample data. The property name, the address and the phone number are made up for the example.

Email

Subject: Your door code for Harbour Guesthouse

Hello Anna,

Your code for the main entrance and room 4: 482 913
The code works from 14/11, 15:00 to 16/11, 11:00.

Address: 1 Example Street, Sampletown
Enter the code on the lock keypad and confirm with the # key.

Need help? Call +48 500 000 000

See you soon,
Harbour Guesthouse

SMS

Harbour Guesthouse: entrance and room 4 code: 482 913. Valid 14/11, 15:00 to 16/11, 11:00. Help: +48 500 000 000

The SMS is sent without accented letters. That is on purpose: with characters such as "ü" or "é" a single message holds 70 characters, and without them it holds 160.

The English version also goes to every guest from a country that has no template of its own, so it is the one worth polishing first. The Polish wording of the same template is shown in the Polish edition of this guide.

Eight languages and how the software picks one

PinRoom has ready templates in eight languages: Polish, English, German, Ukrainian, Czech, Spanish, French and Italian. It picks the language from the guest details in the booking: the country or the language passed on by the booking system. When there is no template for a country, the guest gets the English version.

  • Your own wording in selected languages. You can rewrite the template in, say, English and German only. The other languages keep the default text.
  • Ukrainian SMS in Latin letters. The Ukrainian email is written in Cyrillic and the SMS in the Latin alphabet, so that it fits into one message.
  • Dates the way the guest writes them. The hours and dates of the code are formatted the way they are written in the language of the message.

If you add sentences of your own, about parking for example, add them in every language you really have guests in. A sentence that exists only in the English template will not reach a guest who gets the German one.

Email and SMS: why both at once

An email has room for directions and stays in the inbox, but it is sometimes read too late. An SMS arrives without mobile data, also when roaming, and is at hand at the door. Sending both is the safest choice.

  • SMS length. One message is 160 characters without accented letters. Longer text is split into parts and each part counts as a separate SMS from your package, so leave the directions to the email.
  • A number with a country code. A foreign guest's number should include the country code. PinRoom will not text the code to a nine-digit number with no country code if the guest is not from Poland, because it could reach a stranger. The code then goes by email.
  • No contact in the booking. An iCal calendar from Airbnb holds dates only. You add the phone or email in the panel and the code goes out when you save. See the iCal route on the page about TTLock and Booking.com.

What time to send the code

PinRoom has three modes: right after the booking, the day before arrival and on the day of arrival, the last two at an hour you choose. The default is the day before arrival at 10:00.

ModeWhen it fitsWhat to watch
Right after the bookingnext-day bookings, guests who like to have everything at oncewith a booking made far ahead the message gets buried in the inbox
The day before arrivalmost properties: the guest is already planning the trip and has time to askpick a morning hour, so there is time to answer questions
On the day of arrivalproperties that do not want the code out any earliera guest on the road may miss the email, so an SMS is needed

Whatever the mode, the software guards two things. The message never goes out later than the moment the code starts working, and for a last-minute booking it goes out at once. The code starts working at the check-in time from the property settings. You can add a margin that lets it work up to 240 minutes earlier, and a similar margin after check-out time.

How to set up the message in PinRoom

The owner panel is in Polish for now, so the names of buttons below are given in English with the Polish label in brackets.

1. Fill in the property details

In Settings (Ustawienia) enter the property name, the address and the help phone. These three fields go into every message, so a typo in the phone number will be repeated for every guest.

2. Choose the hours, the send mode and the channels

Set the check-in and check-out times, the "When to send the code" mode (Kiedy wysłać kod) with its hour, and the channels: email, SMS or both. SMS messages are bought in the panel in packages.

3. Adjust the wording on the language tabs

Each language has a subject, an email body and an SMS body. In the text you use variables in curly brackets: {name}, {code}, {rooms}, {from}, {to}, {property}, {address} and {phone}. The software swaps them for the booking data. Do not remove {code} or {phone}.

4. Preview it and send a test

The Preview button (Podgląd) shows the message with sample data before you save. The test button (Wyślij próbę) sends it by email to an address you give, with no real code and without using up any SMS.

5. Walk the guest route with the message in your hand

Stand in front of the property with nothing but the message and find your way to the room as if you were there for the first time. Every spot where you hesitate is a missing sentence.

When a guest reports that nothing arrived, their stay in the panel has a resend button (Wyślij ponownie) and an option to send by another route, to a different email address or phone number. You also see the code in the panel and can read it out.

Common mistakes in door code messages

  • The code hidden under the house rules. The guest opens the message at the door, in the rain, with a suitcase. The code and the door belong at the top.
  • No hour from which the code works. A code typed in too early will not open the door, and the guest will decide it is wrong.
  • One code for all guests. A fixed code in a saved reply is known to everyone who has ever stayed. A code should be created for each booking and expire after departure.
  • A long SMS with directions. Three parts mean three SMS from the package and a text nobody reads on a lock screen.
  • One language only. A guest who has to translate the message alone may get the date or the door wrong, and that ends with a phone call at night.
  • A phone number nobody answers after 8 pm. Late arrivals are exactly when help is needed most.
  • One channel only. An email can land in spam and an SMS can fail on a mistyped number. Two channels are two independent routes to the same guest.

The message is step six of seven in the guide how to switch from keys to door codes. What it should say for emergencies is covered in smart lock battery dead or no internet. Want to see the settings live? Open the panel demo or write to us through the quote form.

The templates, the list of languages, the send modes and the SMS rules come from the PinRoom software, as of 13 November 2026. The way of entering the code applies to locks that run in the TTLock app from the BH WANDEX catalogue.

Questions about the door code message

What must a door code message include?

The code, the name of the room or apartment, the day and hour the code starts and stops working, the address, one sentence on how to enter the code on the keypad, and a help phone number. Extras such as Wi-Fi or parking go below.

When is the best time to send the code to a guest?

For most properties, the morning of the day before arrival. The guest is already planning the trip and has time to ask a question. PinRoom sends the code the day before arrival at 10:00 by default and handles last-minute bookings straight away.

In which languages does PinRoom send messages?

In Polish, English, German, Ukrainian, Czech, Spanish, French and Italian. The language follows the guest details in the booking, and when there is no matching template the guest gets the English version.

Can I change the wording of the message?

Yes. In Settings each language has its own subject, email body and SMS body with variables that the software replaces with the code, the room, the dates, the address and the phone. You can preview the message and send a test by email before saving.

Why does the SMS with the code have no accented letters?

An SMS with accented letters holds 70 characters, and one without them holds 160. PinRoom therefore replaces such letters with plain Latin ones, so the code, the dates and the phone number fit into a single message.

What should I do when a guest did not get the message?

In the panel, on the guest's stay, you can send the message again or by another route, to a different email or phone number. The code is also visible in the panel, so it can be read out over the phone.

See the panel on a demo property

The demo opens without login and nothing you do there is saved or sent. The panel is in Polish for now.