Smart lock battery dead or no internet: what happens and what to do

Two worries come up in every conversation about code locks: "what if the internet goes down" and "what if the battery dies". Each has a concrete answer and a short list of things worth having ready.

In short An electronic lock runs on its own batteries and remembers the codes it was given, so losing the internet or mains power in the building does not leave guests outside. With no internet you only lose the ability to set or delete a code remotely until the gateway is back online. A dead battery is bypassed with a power bank plugged into the socket on the lock, or with the mechanical key. PinRoom flags batteries below 20% in the panel and texts you when a lock loses its connection.

What works without internet and what does not

The lock reaches the network through a Wi-Fi gateway. When the gateway or the router stops, the lock is on its own, but it is still a lock.

ActionWithout internetWhy
Entering with a code set earlierworksthe code and its validity period are stored in the lock
Entering with a card or a keyworksthe lock checks the card itself, the key is mechanical
Opening with a phone at the doorworksthe TTLock app talks to the lock over Bluetooth
Setting a code with a phone at the doorworkschanges made right next to the lock go over Bluetooth
Setting a new code remotelydoes not workthe command has no way to reach the lock
Deleting a code or changing its dates remotelydoes not workthe code will expire by itself at the stored time
Remote unlocking and remote entry logdoes not workboth need the gateway to be online

Based on BH WANDEX descriptions: electronic code locks and hotel code locks (in Polish), read on 13 November 2026.

The internet or the power in the building is down

Start by telling the two apart. Locks on room doors have batteries, so a power cut does not affect them. The Wi-Fi gateway and the router run on mains power, so in a power cut they go down together. For guests the result is the same as with a broken connection: they enter with the codes they already have.

The shared entrance is the exception. An SKD 11 reader on a gate or main door runs on 12 V and controls an electric strike. In a power cut such an entrance needs backup power or a key, so it is worth settling this with the fitter at the quote stage.

What PinRoom does in the meantime

  • It checks the locks every hour. When a lock with a gateway has no connection on two readings in a row, it warns the owner by SMS and email, naming the locks. A brief dropout wakes nobody up. The warning returns at most once every 12 hours.
  • It retries setting the code. If the code for a new booking did not reach the lock, further attempts follow after 5, 10, 20 and 40 minutes, then every hour until it succeeds.
  • It watches arrivals that are close. When check-in is less than two hours away and the code works on at least some of the doors, the guest gets the message despite the failure, and you get their code in the alert so that you can help by phone.
  • It finishes deleting once the network is back. A code that could not be removed from a lock, for example after a cancelled booking, is tried again, and the software tells you that the code is still active.

What you do

  1. Check that the gateway has power and the router is running. Restarting the router is the first thing to try.
  2. Look at the panel: which arrivals already have a code sent and which are waiting. The first group will get in with no help from you.
  3. For a guest whose code was not created in time there are two ways: the mechanical key, or a code set with the TTLock app from a phone, right at the door.
  4. When the network returns you do not have to repeat anything. Pending codes reach the locks at the next attempt.

A weak battery and a dead battery

A dead battery is rarely a surprise if somebody watches the level. The lock shows it in the app, so the drop is visible well in advance.

  • How long they last. BH WANDEX reports from its own experience that batteries in the 3060TTL lock are changed no more than once a year. They are ordinary AAA batteries. In hotel card locks, at 10 to 15 openings a day, they last 12 to 18 months.
  • How you know they are running low. The lock shows the battery level in the app, and models such as the 6100TTL signal that a change is due. PinRoom reads the level every hour, logs an event when a battery falls below 20% and marks that lock in the panel.
  • What if it dies anyway. The 3060TTL-72 has a hidden USB socket: you plug in a power bank and open the door with the code as usual. The 2022TTL-L has emergency power too. The code locks in the catalogue also open with a mechanical key.

The simplest rule: change the batteries in all locks on the same day, before the season or once a year, without waiting for a warning. All you need is a fresh set for each lock.

Battery and emergency power facts: wandex.pl, questions and answers about electronic locks (in Polish), read on 13 November 2026. They apply to the models listed in the lock catalogue.

A backup plan on one page

A property with no staff on site needs a second way in and a person who learns about a problem before the guest does. Write it down once and pin it where anyone covering for you will look.

  1. Mechanical keys to all locks in one labelled place outside the rooms. A second set with the person who lives closest.
  2. A power bank with a cable that fits the socket on the locks, charged, next to the keys.
  3. Spare batteries for at least two locks.
  4. A phone with the TTLock app and admin rights held by a second person, not only by the owner.
  5. An alert number and email entered in the PinRoom settings. Without them a warning about a disconnected lock has nowhere to go.
  6. A phone number in the guest message. A guest who knows who to call solves the problem in one conversation. See the door code message template.

A check that prevents most failures

Once a month, and in a seasonal property before opening, go through three points:

  • In the panel, on the locks tab, use the refresh button (Odśwież stan) and check that all locks are connected and none has a battery below 20%.
  • Set a manual code on one chosen door and open it. That tests the whole chain from the panel to the lock.
  • Check that the keys and the power bank are where the page says they are.

If you are only planning the locks, the number of gateways and the power supply of the shared entrance are settled at the quote stage. The whole project, in order, is described in how to switch from keys to door codes. For a property in Poland, write to us through the form, say how many doors you have and what the entrance looks like, and BH WANDEX will prepare a quote.

Questions about code lock failures

Will the guest get in when the property has no internet?

Yes, if their code was set earlier. The code is stored in the lock together with its validity period, and the lock checks it by itself. With no internet you only cannot set a new code remotely.

Does the lock work during a power cut?

Locks on room doors do, because they run on batteries. The Wi-Fi gateway does not, so no new remote codes are created. A mains-powered reader on the gate needs backup power or opening with a key.

What if the lock battery dies at night and I am away?

The guest calls the number in the message. Someone nearby plugs a power bank into the socket on the lock or opens the door with the mechanical key. That is why the key and the power bank should be kept where a person living close by can reach them.

How often should batteries in a code lock be changed?

For the 3060TTL lock BH WANDEX says no more than once a year, depending on the number of openings. The lock shows its battery level, and PinRoom marks locks below 20% in the panel.

Will an old code work longer if the gateway was off on the day of departure?

Not past its end time. The code has its end date and hour stored in the lock, so after that it stops opening the door even with no internet. PinRoom completes the removal of the code from the lock memory once the gateway is back online.

How will I know that the gateway has stopped working?

PinRoom reads the state of the locks every hour. If a lock has no connection on two readings in a row, you get an SMS and an email with its name, and the panel shows it as disconnected.

See the panel on a demo property

The demo opens without login and nothing you do there is saved or sent. The panel is in Polish for now.