TTLock Airbnb integration: what works and three ways to send codes
Airbnb can connect to a smart lock and hand every guest a code, but not to a TTLock lock, and not outside two countries. Hosts with TTLock still automate their codes. They just take a different road.
In short There is no direct TTLock Airbnb integration. According to the Airbnb Help Center (read on 13 November 2026), the smart lock feature is available only for listings in the US and Canada and only with Schlage, August and Yale locks. A TTLock lock gets its guest codes in one of three ways: you create a timed passcode by hand in the TTLock app, you use a property management system or channel manager that has its own TTLock connection, or you paste the Airbnb iCal calendar into a tool such as PinRoom, which checks it every 15 minutes and creates a code for the dates of each stay.
Does TTLock connect to Airbnb directly
No. Airbnb describes a feature called "Connect a smart lock to Airbnb": once a lock is connected, guests with confirmed bookings automatically receive a unique code that is active only during their trip. The same article sets two limits:
- the feature is only available for listings located in the US and Canada,
- the compatible brands are Schlage, August and Yale, and integrations for other models are not currently supported.
TTLock is not on that list, so the country does not even matter. Airbnb does point to a second road in the same article: a host who manages listings through a third-party property management system that already has a smart lock integration may be able to use that integration for Airbnb guests. Two of the three options below build on this.
A note on shop listings. "Works with Airbnb" next to a TTLock lock usually means only that the lock can hold a code limited to the dates of a stay. Airbnb itself does not see that lock.
Three ways to get a code to an Airbnb guest
| Way | Who creates the code | What you need | Best for |
|---|---|---|---|
| By hand in the TTLock app | you, for every booking | the app only; a gateway only for remote changes | one place, a few arrivals a month |
| A booking system with TTLock | the system, from the booking | a channel manager or PMS connected to both Airbnb and TTLock | hosts who already sell through such a system |
| The Airbnb iCal calendar | a tool that reads the calendar, such as PinRoom | the calendar link from Airbnb and a gateway next to the lock | a few apartments with no channel manager |
Option one: a timed passcode created by hand
After each booking you open the TTLock app, pick the lock and create a timed passcode from check-in to check-out, then paste it into the Airbnb message thread. A random timed passcode needs no gateway, but it runs in whole hours and has to be used on the lock within 24 hours of its start time. The rules behind that are in TTLock passcode types.
This works for as long as you remember. It gets fragile in three situations: a same-day booking, a guest who changes dates and a cancellation. Each one means fixing the code yourself, and changing or deleting a code from a distance needs a gateway, which is covered in TTLock gateway setup.
Option two: a booking system that already talks to TTLock
If Airbnb is connected to a channel manager or a property management system, check first whether that system creates TTLock codes by itself. Several do, and then nothing else is needed. When it does not, a tool in between can do the job: PinRoom reads bookings from WuBook, Zak and Beds24, and a reservation that came from Airbnb through one of them arrives with the guest details and is labelled Airbnb in the panel. No calendar link is involved in that setup. The routes are compared on the page about TTLock and Booking.com, and they apply to Airbnb bookings in the same way.
Option three: the Airbnb calendar in PinRoom, step by step
Every Airbnb listing has a calendar address in the iCal format. It is a plain link that lists the booked dates. PinRoom reads it and creates codes in the TTLock lock from what it finds.
1. Copy the calendar link from Airbnb
In Airbnb, open the calendar of the listing, go to the availability settings and choose to connect calendars, then export. Airbnb shows an address ending in .ics. Each listing has its own address, and the names of the menu items change from time to time.
2. Paste the link next to the apartment in PinRoom
In the panel, under Connections (Podłączenia), add a calendar to the room or apartment and pick the Airbnb label. The address has to start with https, and PinRoom converts a webcal address by itself. One apartment can have calendars from several sites.
3. Wait for the first read
PinRoom fetches the calendar every 15 minutes. Each booked period within the next 365 days shows up in the panel as a reservation with dates and the name of the site. Days you blocked yourself in Airbnb are skipped, because they are not guests.
4. Add the guest's contact
A calendar carries dates, not people. You copy the name and the email or phone number from the Airbnb reservation into the panel or the PinRoom phone app. Without a contact there is nowhere to send the code.
5. The code is created and sent
Once the contact is saved, PinRoom writes a code for the stay to the lock and sends it by email or SMS in the guest's language. If you do not get round to adding the contact, the code is still visible in the panel and you can paste it into the Airbnb thread.
Date changes, cancellations and blocked days
- The guest moved the dates. On the next read PinRoom sees new dates on the same reservation and shifts the validity of the code.
- The guest cancelled. The reservation disappears from the calendar, so PinRoom cancels the stay and deletes the code. This applies only to stays that have not started: a stay in progress is never cancelled, even if the site drops it from the calendar after arrival.
- Nearly everything vanished from the calendar. When more than half of the future reservations disappear at once, and that is at least three stays, PinRoom cancels nothing and asks you to check the calendar on the site. It is a guard against a short outage on the other side.
- The same dates sold twice. Calendars refresh with a delay on the sites as well. When two reservations overlap in one apartment, PinRoom records a warning in the event log.
The delay matters for last-minute bookings. When a guest books an hour before arrival, you can enter the reservation in the panel by hand and not wait for the calendar.
By hand in the TTLock app or automatically with PinRoom
By hand in the TTLock app. With one listing and a few guests a month this is a sensible choice: the app is free and a timed passcode takes a minute. The price is that you watch date changes and cancellations yourself and make sure the code goes out before arrival.
Automatically with PinRoom. With several apartments the number of things to watch grows faster than the number of bookings. PinRoom takes over creating the code, moving it when the dates change, deleting it one hour after the stay ends and messaging the guest. One job stays with you: adding the contact that Airbnb leaves out of the calendar. When a lock loses its connection to the gateway, you get a warning by SMS and email.
Two things to know before you write to us. PinRoom gives guests custom passcodes through a gateway, so every lock needs a Wi-Fi gateway within range. And the owner panel is in Polish for now, while guest messages go out in eight languages. Rates are on the pricing page, in PLN. Locks with installation are supplied in Poland by BH WANDEX and listed in the lock catalogue. If you already run TTLock locks with a gateway, in Poland or elsewhere, describe your setup through the contact form and we will tell you honestly whether it fits.
Sources, read on 13 November 2026: Airbnb Help Center, Connect a smart lock to Airbnb (eligible countries, compatible brands, the PMS route); TTLock Open Platform, random passcodes and custom passcodes through a gateway. The description of PinRoom, including how often it reads the calendar and when it cancels a stay, comes from the software. PinRoom and BH WANDEX are not partners of Airbnb and are not affiliated with the maker of the TTLock app.
Questions about TTLock and Airbnb
Does TTLock work with Airbnb?
Not directly. The Airbnb Help Center says the smart lock feature is only available for listings in the US and Canada and only with Schlage, August and Yale locks. A TTLock lock is linked to Airbnb bookings through a booking system or through the iCal calendar.
Can I connect a TTLock lock in the Airbnb app if my listing is in the US?
No. Location is one condition and the brand is the other. Airbnb lists Schlage, August and Yale as compatible and states that integrations for other models are not currently supported.
Does the Airbnb iCal calendar include the guest's phone or email?
No. It lists booked dates without a name, email or phone number. That is why the contact is added by hand in PinRoom, and the code message goes out once it is saved.
How fast does an Airbnb booking reach PinRoom through iCal?
PinRoom reads the calendar every 15 minutes, so the booking appears after that time at the latest, provided Airbnb has already updated its own calendar.
What happens to the code when a guest cancels on Airbnb?
The dates leave the calendar, PinRoom cancels the stay and deletes the code from the lock. If most future reservations vanish at once, nothing is cancelled and you are asked to check the calendar, because that usually means a short outage.
Do I need a gateway to use TTLock with Airbnb?
Not for random passcodes created by hand. For automatic work, yes: codes are created, changed and deleted from a distance, and that needs a Wi-Fi gateway within range of the lock or a lock with built-in Wi-Fi.
See also
- TTLock passcode types explainedPermanent, timed, one-time, recurring, erase and custom: when to use which.
- TTLock gateway setup (G2)Adding the gateway in six steps, 2.4 GHz Wi-Fi, the status light and fixes.
- Door code message templateWhat it must include, email and SMS examples, languages and send time.
- TTLock and Booking.comThree ways to turn a Booking.com reservation into a TTLock code.
- PinRoom pricingRates per lock, setup, Booking.com and SMS packages, in PLN.
See the panel on a demo property
The demo opens without login and nothing you do there is saved or sent. The panel is in Polish for now.